Your Cart is Empty
E6000 Jewellery & Bead Glue Adhesive with Nozzle Tips - 40.2g - Each
Write a review
$16.95$0.00
Description
E6000 Glue - the best adhesive for your craft projects!
• Includes four nozzle tips
• Easily bonds to polymer clay, metals, wood, leather and much more!
• Dries clear
• Maximum flexibility
• Waterproof – bond remains secure even when exposed to water
Each E6000 tube holds 40.2g / 29.5 ml / 1 fl oz and comes with 4 nozzle tips for precise application!
Purchase additional tips here :
https://ajcraftsupplies.com/products/snip-tips-for-e6000-40-2g-adhesive-3-5pack
Instructions
Follow these step-by-step directions when using E6000 Craft:
We recommend you read all directions and perform a small test before use.
1. Surfaces should be clean, dry and free of dirt. For best results, roughen surface slightly before use.
2. Puncture seal in neck of tube using pointer cap. Application temperature 10 to 32 °C (50 to 90 °F)
3. Apply directly to the surfaces to be bonded or repaired.
4. Allow around 24 hours to curing. Maximum bond strength may take upto 72 hours.
5. Apply a thin coat of petroleum jelly to the thread of the tube before replacing the cap.
6. Uncured adhesive can be cleaned off with acetone or citrus-based solvents.
Note: E6000 is not recommended for use on styrofoam, polystyrene, polyethylene or polypropylene plastics.
We recommend you read all directions and perform a small test before use.
1. Surfaces should be clean, dry and free of dirt. For best results, roughen surface slightly before use.
2. Puncture seal in neck of tube using pointer cap. Application temperature 10 to 32 °C (50 to 90 °F)
3. Apply directly to the surfaces to be bonded or repaired.
4. Allow around 24 hours to curing. Maximum bond strength may take upto 72 hours.
5. Apply a thin coat of petroleum jelly to the thread of the tube before replacing the cap.
6. Uncured adhesive can be cleaned off with acetone or citrus-based solvents.
Note: E6000 is not recommended for use on styrofoam, polystyrene, polyethylene or polypropylene plastics.
-----
E6000 is a high performance industrial adhesive that has become a hit in the craft market with its superior performance, flexibility & strength.
Features & Benefits :
- Industrial-strength single component adhesive
- Bonds to glass, wood, plastics, tin, metal, ceramic, cement, rubber, vinyl, leather, fabric & many more.
- Dries clear
- Photograph safe
- Safe for repeated washing and drying
- Paintable
- Withstands heat up to 66 degrees celsius.
Note: This is a GENUINE E6000 product. Please be aware of counterfeit E6000 products! All genuine tubes of E6000 glue will have the production date and batch number printed on the bottom crease of the tube in dotted numbers.
We source our E6000 tubes only from an authorised distributor of E6000 products.
-----
Read more about our product safety here.